More about 10 x 1 1/2" or 5.0 x 40 Metric, RSS Bulk Pack (2,300/pcs)...
The RSS screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.
RSS screws which are 3 1/8" and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screw’s drawing strength. The CEE thread also reduces the likelihood of splitting the wood and the friction on the screw shank which can result in lowering the driving torque.
More about RSS Structural Screws...
GRK’s RSS™ Rugged Structural Screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.
RSS™ screws which are 3"1/8 and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screw’s drawing strength. The CEE thread also reduces the likelihood of splitting the wood and the friction on the screw shank which can result in lowering the driving torque.
Our round head with built-in shield (washer type head) has no sharp edges such as on conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS™ screw in pre-drilled hardware like hinges and connector plates. Short lengths of the RSS™ may also be used to install wire diamond mesh for stucco buildings.
The #30 Star Drive will deliver approximately 650 lbs of energy, eliminating the need to drill a pilot hole.
The RSS™ screw is the only lag screw replacement of its kind.
RSS™ Structural Screw Test Data
GRK Fasteners utilizes strict quality control procedures. Every batch of screws produced is independently random sampled and quality controlled to the highest standards.
Accreditations for independent test laboratories include:
ICC, CNLA, TÜV, Ü, ISO, DAR.
Print this Page
Click here to print a copy of this page.
All Customer Reviews for "10 x 1 1/2" or 5.0 x 40 Metric, RSS Bulk Pack (2,300/pcs)"
Average Customer Review:
0 Reviews Write an online review and share your thoughts with others.
Submit your Project Story and Images
Please take a few minutes to write a description of your project. You can keep it between one and three paragraphs. Please include at least three images of your project. A before and after shot is much appreciated, but not required.
Project Gallery Rules
Entries including nudity or other offensive material will not be considered. Entries that infringe upon copyrights will not be accepted. Images submitted via the online submission form must be one of the following formats: jpg, gif, or png. Due to volume and workload, submissions will not be returned; please do not send originals. ArchitecturalDepot.com reserves the right to reproduce, publish, display and otherwise use the material for any purpose in any form of media.
